|
Rix Raptor Cam/Valve Timing Tools
|
||
|
Rix
Raptor Tech Rite Gauge
checks pop up, TDC, crossover, overlap, intake and exhaust
valve timing all at the same time. Valve indicators are mounted over the center of the valve heads at a 3' 48" and duplicates valve angles This tool includes a wheel pointer anchor hole and dead stop bolt for quick degree wheel set up. Mounts to the deck of Raptor blocks in a matter of seconds with standard head bolts Part # 47001 Gauge with indicators $165.00
Rix Raptor Valve Length Gauge is a quick and accurate way to measure length of valve face to stem end. Reduces the chance of cutting the stem too short during cam set-ups. This tool insures duplication of valve length during replacement. This is a proven timesaver among engine builders. Gauge incorporates machined 30' and 45' seat surface angles to insure accurate comparisons. Part # 47002 Gauge with indicator $40.00
|
|
