Rix Rockets

Rix Kart Engines

Call to order (330) 494 5107

Daily 8am - 8pm Eastern Time

email:  RickatRixRockets@aol.com

Clone Tools

Combustion Chamber cc Tech Tool. Threads into the spark plug hole and provides a quick and accurate way to check combustion chamber volume.  CNC machined to WKA specs.      Part # CF2001        $20

50 cc Burette  Plastic burette for use with cc Tech Plug.  Accurate and durable.

Part # C02005

$25

Burette Stand and Double Clamp.  Holds your 50cc burette right .over the spark plug hole for easy cc tech measurement.  Also great for keeping your burette handy yet safe in the shop. (Burette sold separately)

Part # CBS101  $35                     (Clamp Only - $10, Part #CBS111)

Clone Max Lift/Cam Profile Tech Tool.  Checks maximum valve running lift by using the valve retainer as a reference point.  Also accurately  checks cam profile and duration directly off rthe pushrods.  Quickly and easily run a duration check by using along with 360-degree degree wheel and pointer kit. (Sold below)

Part # C20010      $55(Bracket only, no indicator  $45, Part #C20011)

Rix Quick-Set Degree Wheel Kit.  The arbor shaft slips over the PTO and uses a slip-clutch to provide quick and easy degree wheel operation on all 4-cycle engines.  The 360 degree markings make Clone duration check a snap when used with the Max Lift Tech Tool (above).  Use the Pointer Kit (sold below) to quickly take accurate reading off the degree wheel.     Part #C47031   $45   (Arbor Only, no wheel - $35, Part #C47033)

Clone Pointer Kit.  Bolts quickly and easily to the Clone cylinder head for accurate degree wheel set-up.

Part # C47003  $15

Quick-Set Piston Stop Bolt.  Quickly inserts through the spark plug hole to set a degree wheel.  Used as a positive stop for setting up degree wheel.  Has a  plastic tip to protect your engine.

Part # C20081$20

Clone Tech:  the Basics.  Instructional DVD includes update DVD.  How to set up and tech Clone engines.  Includes using a burette for cc tech, reading dial indicators, and all the details you need to know about cam profile, duration check, and valve timing. 

Part # CDVD $20

Clone Deluxe Kit All items listed on this page except burette stand and clamp, and piston stop bolt.  (Includes Installed height Go-Gauge, not pictured here.)   A $195 value for $180.

Clone Super Kit:  Add a burrete stand and clamp to your package for only $30 more.  (A $35 value)

Just Added!

Carb No-Go Gauges.  Includes .042, .066 and .615 Class ZZ

inspected/certified no-go pins.

Used to check max diameters of HS jet, emulsion tube and

venturi of BSP Clone class carburetors. 

Part # CCARB      $25                 (not included in kits above)

Clone Installed Height Go-Gauge.  Check the minimum intake valve spring installed height.  Use this check to control spring pressure and the maximum RPM for the Box Stock Project engine class.  With head installed, rotate the engine to TDC and use this tool to determine installed height.  If the gauge fits, its a go!    Part # 20042  $20

Visa, Mastercard, and C.O.D orders accepted

Click here for a printable price list

Scroll to the bottom of the page for our newest offerings!

Just Added!

Spring Comparator. Visually compare a known Clone BSP

valve spring against a questionable wide coil spaced, hgh

nose pressure, aftermarket spring.  Difference between coil

spacing will be visually obvious but can be further confirmed

with a .218" (7/32) no-go plug gauge.  Spring O.D. Max should

not exceed .800".  Comes with a known stock BSP valve spring.

(Aftemarket spring not included.)

Part # CCOMP    $20(not included in kits above)